sintered stailess steel filter elements
Sintering is a process that improves the characteristics of woven wire mesh by bonding the contact points of all the wires together to form a mesh whose wires are securely fused in place. This is achieved through a combination of heat and pressure, and the result is a single layer sintered wire mesh.
A more common application of the sintering process involves laminating multiple layers of woven wire mesh together to form a sintered mesh part that compared to a single layer of wire mesh has increased mechanical strength, greater preservation of filter rating under pressure, is easier to clean, and has better structural integrity. A multiple layer sintered wire mesh part can maintain the filtration rating of its finest mesh layer, while also maintaining the mechanical strength of its coarser support layers.
Ubo Filter Co.,Ltd could supply stainless steel filter elements,filter element, filter disc, sintered filter,filter strainer,polymeric filter,basket filter, wire mesh filter ,pleated filter
P2, P5, P10, P20, P40, P75, P100
Material: SUS 304, SUS 316, SUS316L
Dia. (mm): φ25, φ50, φ75
Length (mm) : 250, 500, 750, 1000
Gases (Natural gas, Hydrogen, Nitrogen etc.)
Oils (Crude oil, Fuel oil, Hydraulic oil, Cooking oil etc.), Solvents, Steam, Air, Liquid etc.
Other specification is available depending on needs or requirements.