Stainless Steel Felt Filter

Stainless Steel Felt Filter

metal felt filter elements have a random matrix of 316-L stainless steel filaments with diameters from 4 to 25 microns. The finer the micron, the more open area is provided in a pure crosshatch pattern. When sinter bonded, this random matrix can provide:

1. Extremely high porosity (up to 85%)
   high flow rates: up to 20 times higher than other media types
   long on-stream lifetime
   downscaling is possible (less filter surface is needed to filter the same volume)
2. Low pressure drop:
   The high porosity of our metal fiber media allows a very low pressure drop (and thus lower energy cost), even at high filtration velocities
3. Ease of cleaning:
   The open structure of porous metal media allows you to clean in situ by backpulsing or backwashing
4. High strength:
   The sintering process creates strong fiber bonds and guarantees a high strength filter medium. Combined with an appropriate inner core, our filter elements can withstand thermal shock, high pressures, and frequent backpulsing.
5. Heat & corrosion resistance:
   Our filter media can be used in high temperature (up to 1000° C, depending on the alloy) and/or corrosive applications - where non-metallic textile, ceramic or polymer products fail
6. Can be used for surface or depth filtration.
   Our filter media enables you to achieve high efficiencies through a cake build-up (surface filtration) and also offer high dirt holding capacity for depth particles capture (depth filtration)
7. Stainless steel and other alloys available:
   not brittle, chemical cleaning is possible, weldable, low thermal expansion, maintains structure (no thermal shock) Depending on the performance you require, we select the proper alloy to provide the required resistance and strength

Ubo Filter Co.,Ltd could supply stainless steel filter elements,filter element, filter disc, sintered  filter,filter strainer,polymeric filter,basket filter, wire mesh filter ,pleated filter

Stainless Steel Metal Felt Filter Element

The cleanable stainless steel metal fiber felt filter adopts sintered stainless steel fiber felt, has high-pressure, high temperature and chemical corrosion resistance. It also has good air permeability, high dirt holding capacity and long-life service time can repeat use by clean, is the ideal filter element for petroleum, chemical and synthetic fiber industries.

Length:250mm, OD-53mm
Filter Precision:1~100um

Type Of Filter Design
•  Plain cylindrical design
•  Pleated configuration design

Features & Benefits
•  Stable pore shapes
•  High permeability
•  Low pressure drop
•  High dirt-holding capacity (longer lifetime)
•  High temperature resistance
•  High differential pressure with stand capacity
•  Strong corrosion resistant
•  Back flushing
•  Excellent mechanical strength

Technical Parameters:
Working Pressure≤31.7Mpa
Working Temperature≤300oC
Medium Viscosity≤260Pa.S
Allow Pressure Drop≤10Mpa
Dirt Holding Capacity≥16.9~41Mgcm2

Stainless Steel Metal Felt Filter Element

The cleanable stainless steel metal fiber felt filter adopts sintered stainless steel fiber felt, has high-pressure, high temperature and chemical corrosion resistance. It also has good air permeability, high dirt holding capacity and long-life service time can repeat use by clean, is the ideal filter element for petroleum, chemical and synthetic fiber industries.

Length:250mm, OD-53mm
Filter Precision:1~100um

Type Of Filter Design
•  Plain cylindrical design
•  Pleated configuration design

Features & Benefits
•  Stable pore shapes
•  High permeability
•  Low pressure drop
•  High dirt-holding capacity (longer lifetime)
•  High temperature resistance
•  High differential pressure with stand capacity
•  Strong corrosion resistant
•  Back flushing
•  Excellent mechanical strength

Technical Parameters:
Working Pressure≤31.7Mpa
Working Temperature≤300oC
Medium Viscosity≤260Pa.S
Allow Pressure Drop≤10Mpa
Dirt Holding Capacity≥16.9~41Mgcm2