Slot Tubes Axial Slot Execution

Product Code: 2262
Category:Wedge Wire Screen Cylinders
Material:Stainless steel 316L
Properties:wedge wire screen cylinders
Application:For Filtration, for water, oil, and gas wells, and for environmental well completions

Email to Us Start Order

Description of Slot Tubes Axial Slot Execution

About Slot Tubes Axial Slot Execution 


Our filtration from the inside to the outside (FITO). In this type of execution the slot forming profiles are parallel to the length of the slotted screen cylinder. The internal working surface is smooth. The support wires are wrapped from the outside around the slot, forming profiles that are connected to them by pressure welding.

The Application Of Slot Tubes Axial Slot Execution

The Slot TUbes Axial Slot Execution are usually used for filtration, for example water, oil, gas well environmental well completions and so on. 

Feature of Slot TUbes Axial Slot Execution:

The Axial Slot Execution, usually  made by dozens of supporting bars with trapezoidal cross section wrapping welding processing. There is a high compressive strength, with a high strength and stiffness, the average tensile strength of individual solder joints to 2000N. Surface is smooth, the gap is uniform,and it is uneasy to block the hole.And on the filter surface uniformly it is sprayed with high-strength non-toxic plastic industry, to enhance filter’s acid and alkali ability and reduce the electrochemical reactions and biological chemical reactions. By physical testing and practical application, temperature resistance can be up to 150℃, Effectively prevent alkaline substances in screen form scale, and the service life is greatly improved and the life is higher than 3 times that of the wire and steel wire filter.

Slot Tubes Axial Slot Execution

Specification of the Slot Tubes Axial Slot Execution

Specification of The Slot Tubes Axial Slot Execution

Specification (wedge wire):

Width(mm): 1.50 1.80 2.30 3.00 3.30 3.70 
Height(mm): 2.20 2.50 2.70 3.60 4.30 4.70 5.60 6.30 7.00

Specification (support rod):

Width(mm): 2.30 3.00 3.30 3.70 
Height(mm): 2.70 3.60 4.70 5.60 6.30
Round: From 2.50mm to 6.0mm

Note: other specifications available as per request

Slot size:

0.10, 0.15, 0.20, 0.25, 0.30…… 6.00mm also achieved upon request.


galvanized low carton (LCG), stainless steel (304,316 etc.)


up to 6 meters


  from 25mm to 1200mm.

Some Types of our Slot Tubes Axial Slot Execution

Slot Tubes Axial Slot Execution

Production And Sales of Slot Tubes Axial Slot Execution

Package: in wood case

Delivery: 5-25 days.

Contact Us
Name:Xueyi Ma
Tel:+86 311 8595 5658