Nickel-based Powder Sintered Filter Plate

Product Code: 2150
Category:Sintered Powder Filter
Material:stainless steel 304,304L,304HC,316,316L,321,430 or as per your request.
Properties:sintered power filter
Application:petroleum, chemical, automotive, aircraft, marine industrial filtration gases, liquids, fuel oil

Email to Us Start Order


Author: Jane
Email:sales@ubooem.com

Description of Nickel-based Powder Sintered Filter Plate


Sintering, the fundamental processing step for all porous metal products, means bonding of powder particles through diffusion at temperatures well below the melting point. In any micron range, after the sintering process, no physical limits between the original metal powder particles are any longer in existence. The grain boundaries run over the original particle boundaries.

Copper powder sintered filter made of copper alloy powder sintered at high temperature, high filtration precision, good air permeability, high mechanical strength, high utilization of materials, suitable for high operating temperatures and impact resistance. Widely used in pneumatic components, chemical industry, environmental protection and other fields.

 

Applications for Nickel-based Powder Sintered Filter Plate:

 

Mainly used in petroleum, chemical, automotive, aircraft, marine industrial filtration gases, liquids, fuel oil, also used extensively for pneumatic, hydraulic circuit filter elements.

 

Advantages for Nickel-based Powder Sintered Filter Plate:

 

1) Generally used in the processing of nickel and nickel alloy powder metal porous filter element is made

2) This form permeability coefficient match with 2 mm thickness element

3) The product's performance achieve or exceed GB

4) Materials are pure nickel filter elements, high temperature alloy Inconel 600 filter elements, filter elements Monel

5) High-temperature alloys allowed in≤1000 degrees with working conditions,Nickel monel allowed in ≤550 degrees with working conditions.

6) Provides tubular, plate, sheet, discoid, ring, rod, cone and plate, strip.

 

Features for Nickel-based Powder Sintered Filter Plate:

 

1) high precision filter: pore stability, will not change the pore pressure changes with the phenomenon. Can effectively remove suspended solids and particles, excellent filtration, purification effect.

2) permeability, pressure loss is small. Filter composed entirely of spherical powder, high porosity, pore size uniformity and smooth, the initial resistance is small, easy cleaning, regeneration ability, long service life.

3) high mechanical strength, good rigidity, good plasticity, anti-oxidation, corrosion protection without additional framework support, installation and use, easy maintenance, assembly, and can be welding, bonding and mechanical processing.

4) uniform porosity, especially for fluid distribution, homogenization treatment uniformity requirements of the occasion.

5) Forming a copper powder products, without cutting, effective utilization of raw materials is high, maximum material savings.

6) Filtration: 5 ~ 50μm.

Nickel-based powder sintered filter plate

Specification of the Nickel-based Powder Sintered Filter Plate


Absolute
Rating (µ)
Bubble Point Pressure (Pa) Average Air Permeability
(L/dm2/min)
Thickness
(mm)
Weight
(g/㎡)
Porosity
(%)
Dirt Holding
Capacity
(mg/cm2)
3 12300 9 0.35 975 65 6.40
5 7600 34 0.34 600 78 5.47
7 5045 57 0.27 600 72 6.47
10 3700 100 0.32 600 77 7.56
15 2470 175 0.37 600 80 7.92
20 1850 255 0.49 750 81 12.44
25 1480 320 0.61 1050 79 19.38
30 1235 455 0.63 1050 79 23.07
40 925 580 0.66 1200 77 25.96

Note: We can design and fabricate according to customer requirements

Production And Sales of Nickel-based Powder Sintered Filter Plate


Each product is packed with bubble bag and then few bags to a wooden case (fumigation certificate)

Tel
Skype
Message
Email
Contact Us
Name:Sherry
Tel:0086-311-83289301