Stainless Steel Wire Mesh Pressure Leaf Filter

This kind of Stainless Steel Wire Mesh Pressure Leaf Filter are made of muti-layer sintered wire woven mesh.Could be Added with Connectors,Gasket,O-ring,Inside/Outside Support Sheet and etc.Its common length are 10",20", 30", 40".It has good capacicties such as the corrossion resistance,good air permeability,easy to back wash,high filter rating and etc.

Stainless Steel Wire Mesh Pressure Leaf Filter Details:

1) Filter Materials:SUS 316L,304

2) Filtering Rating:1-200 micron

3) Filter Media:Sintered Wire Mesh

4) Shapes:Cartridge Filter, Disc Filters,Pleated Filter Elements, Filter Panel and etc.

5) Working Temperature:-200 —600°C

Stainless Steel Wire Mesh Pressure Leaf Filter Meidum Infos:

1) Layers:3-5 layers

Standard Type:5-layer sintered wire woven mesh

2) Standard Thickness:1.7mm+-0.2mm

3) MOC:SUS304,316L

4) Medium Composition:

100 Mesh+Fine Mesh+100Mesh+12*64+64*12

Stainless Steel Wire Mesh Pressure Leaf Filter Details:

1) Filter Materials:SUS 316L,304

2) Filtering Rating:1-200 micron

3) Filter Media:Sintered Wire Mesh

4) Shapes:Cartridge Filter, Disc Filters,Pleated Filter Elements, Filter Panel and etc.

5) Working Temperature:-200 —600°C

Stainless Steel Wire Mesh Pressure Leaf Filter Meidum Infos:

1.Layers:3-5 layers

Standard Type:5-layer sintered wire woven mesh

2.Standard Thickness:1.7mm+-0.2mm

3.MOC:SUS304,316L

4.Medium Composition:

100 Mesh+Fine Mesh+100Mesh+12*64+64*12