a) permanent filter
Permanent filters are classified according to the structure of nets, line gap type, such as sintering, magnetic filter.
b) temporary filters
Temporary filter according to the structure can be divided into y-type filter, t-typefilter, blue filter, p-type filter, flat-plate-type filter
Pipe filter is composed of pipe, tube, filter basket, flange, flange covers and fasteners and other components.
Installed on the pipe to remove large solids in fluid, making machinery and equipment (including compressors, pumps, etc), the instruments are functioning and running, stable process to ensure safety.
After entering the filter basket when fluid passes through the cylinder, solid particles are blocked within the filter basket and clean fluid through the filter basket andfilter egress. When cleaning is required, screw head bottom plug, drain the fluid, remove flange covers, cleaning up after reload. Therefore, it is extremely easy to use and maintenance.
Pipe filter with compact structure, capacity, and low pressure loss, wide application, easy to maintain, and other advantages, the main applicable materials are:
Weak corrosive chemical, oil chemical production materials, such as: water, oil, ammonia, hydrocarbons, etc.
Chemical in the production of corrosive materials such as caustic soda, soda ash,concentrated sulphuric acid, carbonic acid, galacturonic acid, and so on.
Refrigeration and low temperature materials, such as methane, liquid ammonia, liquid oxygen and liquid coolant.
Hygiene requirements for the production of food, pharmaceutical materials, such as: beer, beverages, dairy products, syrups, etc.