The stainless steel wedge wire filter strainer is resistant to acid, alkali and organic corrosion and is particularly suitable for the filtration of high-strength, high-toughness sulfur-containing gases. Moreover, the stainless steel wedge wire filter element is suitable for the high-pressure environment, can be welded, easy to handle, stable hole shape, uniform distribution, ensure stable filtration performance, good regeneration performance and recovery performance after repeated cleaning and regeneration is more than 90%.
Here are some considerations for using stainless steel filters:
When using a stainless steel filter element, different work is performed depending on the raw materials used. As the use time is extended, impurities in the water will clog the filter element, and the activated carbon filter element will absorb saturation. Therefore, in general, the filter element needs to be replaced within 3 months, and the activated carbon filter element needs to be replaced within 6 months. Since hollow fibers cannot be cleaned, they are usually placed at the rear end of PP cotton and activated carbon. Otherwise, it is easy to stop. As the end of the water purification equipment, it needs to be replaced within 1-2 years.
The service life of the stainless steel filter element can be continuously and repeatedly cleaned according to the conditions of use, and the service life is continuously extended, which can greatly reduce the use cost.
How to adjust the filtering capacity of a stainless steel filter?
1. To observe the flow rate of the stainless steel filter element, if the valve is open and the flow rate is still small, check if the stainless steel filter element is clogged.
2. The medium pressure can be checked from time to time to ensure that the flow pressure must reach the pressure required for filtration so that the filtration effect can be well accomplished.
3. The installation position and working environment of the stainless steel filter element also affect the flow of the filtration flow, and the different positions and precisions of the filtration function are also different.
4. What needs to be done is to adjust the right amount of stainless steel filter, mainly to see what kind of flow is needed, and to control it by changing the medium pressure and other conditions.
We specialize in providing stainless steel wedge wire filters, as well as a variety of wedge wire products, more professional knowledge, please pay attention to our website information.