filter element,filter strainer,sinter filter,wedge wire screen,UBO Filter Equiment Co.,Ltd

Filter disc

Top FAQ

How is the wedge wire used for sand control screen pipe made?

2019-02-21Tags:Wedge wire screen sand control screen pipe,Wedge wire for well screen pipe,Wedge wire construction profiles for well screen pipe,Posted By Eva

The fabricated and welded construction makes for durable quality vessel internals and media retention products. Wire mesh and perforated pipe may be less expensive initially, but wedge wire screens offer easier installation and long-term operating and cost benefits.

What is wedge-wire for sand control screen Pipe and how it’s made

Wedge wire screens are manufactured by resistance welding V-shaped wire on support rods. Our wedge wire screen begins with the highest quality raw wire then is made into screen that is cut, shaped, fabricated and cleaned.

Wedge wire can be ordered as raw screen material or fabricated to a finished product to suite your application requirements. The pin point control over the specifications of the slot is what allows Retai wedge wire Screen to provide its customers with highly accurate flow distribution and effective media, debris and sediment filtration. Support Rods running perpendicular to the wrap wire strengthen and maintain the proper design configuration of the screen allowing it to handle intense pressure demands.

Our Wedge Wire Screen is designed to control various processing conditions including volumetric flow rate, minimum dimensional media retention, minimum open area and fluid pressure capabilities. Retai wedge wire Screen is able to professionally work a large variety of stainless steels and alloys into both standard or customizable screen applications and accessory products.

Screens are available in slot sizes ranging from 0.001 in. (25μm) up to (1/2”).

The most common material of construction is 300 series stainless steel, however many exotic alloys are available upon request such as 321SS, Duplex & Super Duplex SS, Alloy 20, Hastelloy C-276, Alloy B-3, Titanium, Monel 400.

Screen diameters range from 0.750 in. to 38” in size straight from our machines. Screen can be fabricated in upwards to 52” O.D in two or more sections depending on the requirements.

Screens also are made in various different configurations, including cylindrical, flat, specialty shapes or curved. Many different variations of wire and rod sizes/profiles can be selected to develop the exact screen of your choice. A wide range of wire and rod shapes make it possible to achieve the optimum balance of strength, open area, abrasion resistance and filtration efficiency.

Why use wedge wire for well screen pipe?

General benefits of using wedge wire which associates to most industries are Extended lifetime
Slot during abrasive operation on the screen surface does not change
Capability to withstand heavy loads
High open area
less prone to clogging
Perfectly smooth and flat surface

High precision of execution Increased capacity and more precise separation
Self-cleaning effect
Low pressure loss
Increased efficiency
Permanence of exploited resources
Lower capital cost and maintenance

Wedge wire construction profiles For Well screen pipe

Wedge Wire Screen Diameter For Well Screen

Screen diameters range from 0.750” to 38”, and up to 48” diameters in fabricated sections.

Your specific tolerance and size requirements will be adhered to and meet the required industry standards. By designing and building our screen machines we can assure ourselves of the best possible attention to detail, thereby the finest finished product.

UBO Screen provides custom engineered and fabricated filtration equipment such to meet all our customers filtration needs which includes Sub Arc, Tig, Mig and Stick welding capabilities and many other machines such as water jet, lathe etc. no job is too complex. These capabilities greatly reduce manufacturing time and allow UBO Well Screen to provide fast delivery of our products.

Related

Tel

Message

Contact Us: Name:Xueyi Ma; Tel:+86 311 8595 5658