How to properly use a different filter method

How to properly use a different filter method:
     Cartridge filter is made of good filtering properties textile fiber yarns precision wound on the porous skeleton.Its yarn material polypropylene fiber, acrylic fiber, cotton fiber etc.By controlling yarn twining of tightness and dilute density,can be made into various precision filters element,they can effectively remove all kinds of liquid suspended solids, particles impurities etc,for various liquids have a higher purifying effect.Bulk type activated carbon cartridge Filter will need to activated carbon particle load in special plastic housing,Used welding equipment will end caps welding at both ends of shell aspect,both ends of shell aspect, Were placed in filtering effect non-woven fabric filter sheet,Ensure carbon core won't fall in carbon powder and black water in use.
 

How to properly use a different cartridge filter
1.Use suitable wetting agents (such as water) wet o-ring and filter seat jacks, hand grip the filter near to one end of the O-ring,after the filter plugged,Remove the filter bag,Then the metal casing is installed, use the tool to tighten the filter.
2.Close filter drain openings,open the release valve at the top of the shell,and slightly open the inlet valve ,so that material into the shell,until the liquid overflows from the top of the housing bleed valve,then close the bleed valve.
Note Check the demolition at leaks; according to the customer's needs, cartridge filter housing cover can be made of different types of connectors.
   Drainage (sewage) port filter size, structure and size of the filter depends on the design flow, liquid filtration media properties.
    Filters are made of high quality stainless steel, reasonable structure, not only the small size, low cost, traffic, and maintenance, for the core, easy to assemble, filtering accuracy 0.5-100um, flow 0.5-200m3 / h.
According to user needs can also be produced with different sizes of products.