Resin Trap Screen

Resin Trap Screen Predominantly used in water treatment processes namely in ‘Ion Exchange’ and other numerous media filter systems, Completion Products offers a Resin Trap Screen. This screen system is primarily used as a safety device and is positioned immediately after the outlet nozzle of the vessel/reactor.
 

The Profile Wire Screen element included with the main housing as depicted below eliminates the migration and loss of expensive resin/media, whilst at the same time protecting your pumping equipment. A combination of different Profile Wire sizes and slot openings can be used depending on your circumstances. Completion Products will also determine the effective screen open area in order to improve upon efficiency and minimise the pressure drop.
 
In the event that there is resin/media build up with the Resin Trap Screen assembly, an increase in the pressure drop will result and if one is installed, the resin/media will be visible through the ‘sight glass’.

Wedge wire screen has long been considered the most effective media for use in under draining. Wedge wire has an inherent even pattern if open area that allows for accurate flow distribution. Its internal support rod structure gives it a higher collapse strength allowing it to handle the most demanding load applications. Constructed of stainless steel and many exotic alloys wedge wire is easily worked to meet both typical and unique under drain designs. Although UBO supplies arrange of standard wire shapes, an in house wire forming facility allows for custom shaping if required by design.